Whitepapers - Machine tool products

Browse documents

• Application note: SPRINT™: Blade Toolkit
  

  Application note: SPRINT™: Blade Toolkit

  The SPRINT™ Blade Toolkit offers a unique solution for end users requiring measurement data for the production and repair of blades and bladed disks. The data provided by the Blade Toolkit can be used in a number of high-precision applications including blade tip refurbishment, in-process blade measurement and root blending of bladed disks.

  [592kB]
• Application note: SPRINT™: Machine Health Check
  

  Application note: SPRINT™: Machine Health Check

  The SPRINT™ Machine Health Check application provides a unique solution for end-users and machine tool builders who are looking to design sustainable machining processes on 3-axis and 5-axis table/table milling centres. This application allows machine tool performance verification in less than one minute using a simple test based on the exceptionally accurate measurement capability of the SPRINT system.

  [2.3MB]
• Application note: SPRINT™: MTM Toolkit
  

  Application note: SPRINT™: MTM Toolkit

  The SPRINT™ MTM Toolkit offers exceptionally repeatable diameter measurement to machine tool builders who produce Y-axis multi-task machine tools for use in the machining of highly accurate diameters.

  [1.3MB]
• Technical note: Innovative frequency hopping (FHSS) radio transmission probe
  

  Technical note: Innovative frequency hopping (FHSS) radio transmission probe

  An inspection probe is used on a CNC machine tool to determine the location and orientation of parts during setting, and for inspecting the size and position of critical features for verification and process control. It does so by sensing a series of discrete points on the surface of the component. When the probes stylus meets the surface of the part, a trigger signal is generated. This signal must be passed to the CNC so that the position of the machine at that instant can be recorded.

  [62kB]
• 기술 노트: Renishaw의 프로빙 기술과 스트레인 게이지 기술을 갖춘 새로운 초소형 OMP400 프로브 [ko]
  

  기술 노트: Renishaw의 프로빙 기술과 스트레인 게이지 기술을 갖춘 새로운 초소형 OMP400 프로브

  Sir David McMurtry가 접촉식 트리거 프로브를 발명한 1972년부터 지금까지 프로빙은 공작 기계의 자동 생산 공정에서 핵심적인 역할을 하고 있습니다. 동역학적 위치를 활용하여 높은 반복도로 스타일러스를 고정하는 이 간단한 메커니즘은 30년 넘게 많은 Renishaw 프로브의 기반이 되었습니다. Renishaw의 동역학적 접촉식 트리거 프로브는 지속적으로 제조 산업에 많이 사용되고 있으며, 시장에서 가장 많이 판매되는 프로빙 제품이자 대다수의 최종 사용자와 공작 기계 제조업자들이 가장 먼저 찾는 제품입니다. 이러한 프로브의 측정 성능과 신뢰성을 과소평가하면 안 됩니다.

  [782kB]
• White paper: Innovative frequency hopping radio transmission probe
  

  White paper: Innovative frequency hopping radio transmission probe

  Inspection probes have become a vital contributor to manufacturing process efficiency, enabling rapid part set-up and batch changeover, plus part verification and in-process control of critical component dimensions. All spindle and turret-mounted probes need a means of signal transmission, with radio transmission being the most common on large machines and 5-axis machining centres. However, there are many challenges to the successful application of radio transmission in the factory, not least different local regulations and sources of interference from other radio-controlled equipment. In 2003, Renishaw introduced the world’s first frequency hopping spread spectrum (FHSS) radio transmission for inspection probes, a robust, compact and universally applicable solution for probing on all but the smallest of machines.

  [157kB]
• White paper: Innovative laser tool setting technology provides accuracy, flexibility and robust operation
  

  White paper: Innovative laser tool setting technology provides accuracy, flexibility and robust operation

  Laser systems for tool setting and broken tool detection on CNC machining centres have become popular in recent years as manufacturers realise the benefits of fast process set-ups and in-process feedback on tool condition, especially on small tools that cannot be measured using contact sensors.

  [365kB]
• White paper: Innovations in touch-trigger probe sensor technology
  

  White paper: Innovations in touch-trigger probe sensor technology

  Since the invention of the touch-trigger probe in the 1970s, these devices have formed the main means of sensing for dimensional measurement on co-ordinate measuring machines (CMMs) and machine tools. Scanning sensors are increasingly being used on CMMs to measure complex shapes and to characterise the form of prismatic components. However, touch-trigger sensors still have a major role to play in the inspection of component size and position on CMMs, and in workpiece set-up and in-process control on machine tools.

  [442kB]