インストレーションマニュアル - 三次元測定機用製品

資料一覧

• Installation guide: ACR2 [en]
  

  Installation guide: ACR2

  No description available

  [1.1MB]
• Installation & user's guide: ACR3 (H-1000-5087) [en]
  

  Installation & user's guide: ACR3 (H-1000-5087)

  Mounted within the CMM’s working envelope, the ACR3 is combined with the modular rack system (MRS) to form an automatic change rack for probes and extension bars that incorporate the Renishaw autojoint.

  [1.3MB]
• Installation guide: Autochange system (H-1000-6010) - legacy [en]
  

  Installation guide: Autochange system (H-1000-6010) - legacy

  Renishaw's autochange equipment is the world's first integrated CMM probe exchange system. Mounted within the CMM's working envelope, the autochange system facilitates fast, automatic probe exchange without the need for re-qualification of the probe assembly.

  [608kB]
• Installation guide: IS1-2 [en]
  

  Installation guide: IS1-2

  This guide describes how the IS1-2 (interface selector) functions when used with multiple Renishaw probing systems. It gives information on physical installation, system connections and interface settings, as well as assistance in fault finding during the installation of a system.

  [648kB]
• Installation & user's guide: MCUlite-2, MCU5-2 and MCU W-2 (H-1000-5280) [en]
  

  Installation & user's guide: MCUlite-2, MCU5-2 and MCU W-2 (H-1000-5280)

  The MCUlite-2 is a basic entry level joystick . It has the controls necessary to control a 3-axis touch-trigger CMM and Renishaw head but without the sophistication of an LCD display screen. The MCU5-2 has been developed for use with Renishaw's REVO and PH20 systems, providing the ability to move the CMM in the probe and stylus axis and has an LCD display. The wireless manual control unit (MCU W-2) is a CMM joystick designed for use with Renishaw's range of UCC controllers. Based on the MCU5‐2 joystick design, the MCU W‐2 uses modern battery technology and Bluetooth® radio modules to provide an effective wireless joystick with a maximum range of 25 m and over eight hours between battery changes.

  [1.1MB]
• Installation & user's guide: MRS (H-1000-5088) [en]
  

  Installation & user's guide: MRS (H-1000-5088)

  This guide contains information on the Renishaw modular rack system (MRS) . In addition to providing an introduction and simplified explanation of the MRS, this guide also provides detailed installation instructions.

  [848kB]
• Installation guide: MRS2 (H-1000-5255) [en]
  

  Installation guide: MRS2 (H-1000-5255)

  This guide provides detailed installation instructions for the Renishaw modular rack system (MRS2).

  [4.6MB]
• Installation & user's guide: NDI AUTOsense touch-trigger module (H-1000-5180) [en]
  

  Installation & user's guide: NDI AUTOsense touch-trigger module (H-1000-5180)

  The AUTOsense module is a dual function stylus holder that enables touch trigger probing for both single-point and scanning. The AUTOsense module is only compatible with supported NDI hand-held probes.

  [1.3MB]
• Installation & user's guide: PH10 PLUS (H-1000-7592) [en]
  

  Installation & user's guide: PH10 PLUS (H-1000-7592)

  Each of the heads in the PH10 PLUS motorised probe head range is a general purpose, versatile unit designed specifically for use on direct computer controlled (DCC) coordinate measuring machines (CMMs).

  [960kB]
• Installation & user's guide: PH10M-iQ PLUS (H-1000-7564) [en]
  

  Installation & user's guide: PH10M-iQ PLUS (H-1000-7564)

  PH10M-iQ PLUS is a derivitive of the PH10 PLUS range of heads. PH10M-iQ PLUS has inferred qualification meaning that after initial calibration is performed, all other positions of the head are inferred which eliminates the need to recalibrate each required head position.

  [872kB]
• Installation & user's guide: PH20 [en]
  

  Installation & user's guide: PH20

  Installation documentation for Renishaw's 5-axis technology measurement system for touch-trigger applications on all sizes of CMM.

  [1.6MB]
• Installation guide: PHC10-3 PLUS [en]
  

  Installation guide: PHC10-3 PLUS

  This guide gives information on physical installation, system connections, communications and interface settings, as well as assistance in fault-finding during the installation of PHC10-3 PLUS.

  [918kB]
• Installation & user's guide: PHS-2 (H-1000-5620) [en]
  

  Installation & user's guide: PHS-2 (H-1000-5620)

  PHS-2 is designed to meet the arduous requirements of 'body-in-white' measurement, where fine angular position and long reach are needed.

  [3.2MB]
• Installation guide: PI 200-3 [en]
  

  Installation guide: PI 200-3

  No description available

  [1.3MB]
• Installation guide: PI 7-3 [en]
  

  Installation guide: PI 7-3

  The PI 7-3 is a dedicated signal conditioner for interfacing the TP7M series of probes or touch-trigger probe types such as TP2, TP20 or TP6 / TP6A, to the CMM controller.

  [865kB]
• User guide: Retrofit cabinet (H-1000-5186) [en]
  

  User guide: Retrofit cabinet (H-1000-5186)

  Renishaw's controller cabinet is a standard 19 inch rack mounting unit that is used for storing Renishaw's range of controllers, servo power amplifiers and interfaces. This cabinet provides a unique connection to the CMM resulting in a neat and tidy installation. As well as providing storage for all the Renishaw controller equipment the cabinet has an integral mains system with on/off switch.

  [684kB]
• Installation & user's guide: RSP3 (H-1000-5124) [en]
  

  Installation & user's guide: RSP3 (H-1000-5124)

  The RSP3 range of probes gives REVO users the ability to carry cranked stylus arrangements and enhanced capability for carrying long styli.

  [1.6MB]
• Installation & user's guide: SFP2 (H-1000-5365) [en]
  

  Installation & user's guide: SFP2 (H-1000-5365)

  The SFP2 probe system brings automated surface finish (roughness) measurement to CMMs as part of the REVO 5-axis multi-sensor measuring system.

  [1.3MB]
• Installation guide: SP25M [en]
  

  Installation guide: SP25M

  This document is intended as a guide to initial installation and integration of the Renishaw SP25M analogue scanning/measurement probe system.

  [1.2MB]
• Installation & user's guide: SP600, SCR600 and AC1, AC2 (H-1000-5175) [en]
  

  Installation & user's guide: SP600, SCR600 and AC1, AC2 (H-1000-5175)

  SP600M is an auto-jointed, multiwired analogue scanning probe suitable for mounting on certain motorised and fixed Renishaw probe heads. SP600Q is a quill mounted version of the SP600M analogue scanning probe. SP600 is a shank mounted version of the SP600M analogue scanning probe.

  [887kB]
• Installation guide: SP80 and SP80H [en]
  

  Installation guide: SP80 and SP80H

  This installation and integration guide is intended to assist OEM and Renishaw personnel in the initial installation, integration and use of the Renishaw SP80 and SP80H ultra-high accuracy scanning probes. The SP80 and SP80H are quadrature output measurement probes that provide class-leading performance, as well as the most flexible use of styli for maximum productivity.

  [1.2MB]
• Installation guide: SPA2-2 (H-1000-5247) [en]
  

  Installation guide: SPA2-2 (H-1000-5247)

  SPA2-2 servo power amplifier installation guide

  [1.4MB]
• Installation guide: UCC S5 REVO-2 CMM controller (H-1000-7598) [en]
  

  Installation guide: UCC S5 REVO-2 CMM controller (H-1000-7598)

  No description available

  [1.5MB]
• Installation guide: UCC T3 PLUS and UCC S3 CMM controller (H-1000-2118) [en]
  

  Installation guide: UCC T3 PLUS and UCC S3 CMM controller (H-1000-2118)

  No description available

  [1.5MB]
• Installation guide: UCC T3-2 (H-1000-5254) [en]
  

  Installation guide: UCC T3-2 (H-1000-5254)

  No description available

  [1.2MB]
• Installation guide: UCC T5 (H-1000-7573) [en]
  

  Installation guide: UCC T5 (H-1000-7573)

  The UCC T5 must be used in conjuction with a Renishaw SPA3. Setup and commisioning should be completed through Renishaw's UCCassist-2 software. The UCC T5 has replaced the UCC2 and 5-axis daughtercard. It also replaces the TEC card and provides support for 16 channels of temperature compensation. The UCC T5 uses an external power supply and manges full control of the PH20 head, CMM and probe signals and communicates with the CMM's computer.

  [1.4MB]