Manuales de instalación: productos para CMM

Busque documentos

• Installation guide: ACR2 [en]
  

  Installation guide: ACR2

  No description available

  [1.1MB]
• Installation & user's guide: ACR3 [en]
  

  Installation & user's guide: ACR3

  Mounted within the CMM’s working envelope, the ACR3 is combined with the modular rack system (MRS) to form an automatic change rack for probes and extension bars that incorporate the Renishaw autojoint.

  [1.3MB]
• Installation guide: Autochange system [en]
  

  Installation guide: Autochange system

  Renishaw's autochange equipment is the world's first integrated CMM probe exchange system. Mounted within the CMM's working envelope, the autochange system facilitates fast, automatic probe exchange without the need for re-qualification of the probe assembly.

  [608kB]
• Installation guide: IS1-2 [en]
  

  Installation guide: IS1-2

  This guide describes how the IS1-2 (interface selector) functions when used with multiple Renishaw probing systems. It gives information on physical installation, system connections and interface settings, as well as assistance in fault finding during the installation of a system.

  [648kB]
• Guía de instalación y uso: MCU5-2 y MCU W-2
  

  Guía de instalación y uso: MCU5-2 y MCU W-2

  No description available

  [1.2MB]
• Installation & user's guide: MRS (H-1000-5088) [en]
  

  Installation & user's guide: MRS (H-1000-5088)

  This guide contains information on the Renishaw modular rack system (MRS) . In addition to providing an introduction and simplified explanation of the MRS, this guide also provides detailed installation instructions.

  [848kB]
• Installation guide: MRS2 (H-1000-5255) [en]
  

  Installation guide: MRS2 (H-1000-5255)

  This guide provides detailed installation instructions for the Renishaw modular rack system (MRS2).

  [4.6MB]
• Installation & user's guide: NDI AUTOsense touch trigger module [en]
  

  Installation & user's guide: NDI AUTOsense touch trigger module

  The AUTOsense module is a dual function stylus holder that enables touch trigger probing for both single-point and scanning. The AUTOsense module is only compatible with supported NDI hand-held probes.

  [1.3MB]
• Guía de instalación y uso: PH10 PLUS
  

  Guía de instalación y uso: PH10 PLUS

  No description available

  [1.1MB]
• Installation & user's guide: PH10M-iQ PLUS [en]
  

  Installation & user's guide: PH10M-iQ PLUS

  PH10M-iQ PLUS is a derivitive of the PH10 PLUS range of heads. PH10M-iQ PLUS has inferred qualification meaning that after initial calibration is performed, all other positions of the head are inferred which eliminates the need to recalibrate each required head position.

  [872kB]
• Installation & user's guide: PH20 [en]
  

  Installation & user's guide: PH20

  Installation documentation for Renishaw's 5-axis technology measurement system for touch-trigger applications on all sizes of CMM.

  [1.6MB]
• Installation guide: PHC10-3 PLUS [en]
  

  Installation guide: PHC10-3 PLUS

  This guide gives information on physical installation, system connections, communications and interface settings, as well as assistance in fault-finding during the installation of PHC10-3 PLUS.

  [918kB]
• Installation & user's guide: PHS-2 [en]
  

  Installation & user's guide: PHS-2

  PHS-2 is designed to meet the arduous requirements of 'body-in-white' measurement, where fine angular position and long reach are needed.

  [3.2MB]
• Installation guide: PI 200-3 [en]
  

  Installation guide: PI 200-3

  No description available

  [1.3MB]
• Installation guide: PI 7-3 [en]
  

  Installation guide: PI 7-3

  The PI 7-3 is a dedicated signal conditioner for interfacing the TP7M series of probes or touch-trigger probe types such as TP2, TP20 or TP6 / TP6A, to the CMM controller.

  [865kB]
• Guía de instalación y uso: Armario de retrofit
  

  Guía de instalación y uso: Armario de retrofit

  El armario de control de Renishaw es una unidad estándar de montaje en rack de 19 pulgadas utilizada para almacenar la gama de controles, servoamplificadores e interfaces de Renishaw. El armario es un sistema que permite almacenar y mantener centralizadas las conexiones de la MMC de forma limpia y ordenada. Además de un lugar de almacenamiento para todos los equipos Renishaw, el armario dispone de un sistema integrado para las conexiones eléctricas con interruptor de encendido y apagado.

  [527kB]
• Installation & user's guide: RSP3 (H-1000-5124) [en]
  

  Installation & user's guide: RSP3 (H-1000-5124)

  The RSP3 range of probes gives REVO users the ability to carry cranked stylus arrangements and enhanced capability for carrying long styli.

  [1.5MB]
• Installation & user's guide: SFP2 (H-1000-5365) [en]
  

  Installation & user's guide: SFP2 (H-1000-5365)

  The SFP2 probe system brings automated surface finish (roughness) measurement to CMMs as part of the REVO 5-axis multi-sensor measuring system.

  [1.3MB]
• Installation guide: SP25M [en]
  

  Installation guide: SP25M

  This document is intended as a guide to initial installation and integration of the Renishaw SP25M analogue scanning/measurement probe system.

  [1.2MB]
• Installation & user's guide: SP600, SCR600 and AC1, AC2 [en]
  

  Installation & user's guide: SP600, SCR600 and AC1, AC2

  SP600M is an auto-jointed, multiwired analogue scanning probe suitable for mounting on certain motorised and fixed Renishaw probe heads. SP600Q is a quill mounted version of the SP600M analogue scanning probe. SP600 is a shank mounted version of the SP600M analogue scanning probe.

  [887kB]
• Installation guide: SP80 and SP80H [en]
  

  Installation guide: SP80 and SP80H

  This installation and integration guide is intended to assist OEM and Renishaw personnel in the initial installation, integration and use of the Renishaw SP80 and SP80H ultra-high accuracy scanning probes. The SP80 and SP80H are quadrature output measurement probes that provide class-leading performance, as well as the most flexible use of styli for maximum productivity.

  [1.2MB]
• Installation guide: SPA2-2 (H-1000-5247) [en]
  

  Installation guide: SPA2-2 (H-1000-5247)

  SPA2-2 servo power amplifier installation guide

  [1.4MB]
• Installation guide: UCC S5 REVO-2 CMM controller (H-1000-7598) [en]
  

  Installation guide: UCC S5 REVO-2 CMM controller (H-1000-7598)

  No description available

  [1.5MB]
• Installation guide: UCC T3 PLUS and UCC S3 CMM controller (H-1000-2118) [en]
  

  Installation guide: UCC T3 PLUS and UCC S3 CMM controller (H-1000-2118)

  No description available

  [1.5MB]
• Installation guide: UCC T3-2 (H-1000-5254) [en]
  

  Installation guide: UCC T3-2 (H-1000-5254)

  No description available

  [1.2MB]
• Installation guide: UCC T5 (H-1000-7573) [en]
  

  Installation guide: UCC T5 (H-1000-7573)

  The UCC T5 must be used in conjuction with a Renishaw SPA3. Setup and commisioning should be completed through Renishaw's UCCassist-2 software. The UCC T5 has replaced the UCC2 and 5-axis daughtercard. It also replaces the TEC card and provides support for 16 channels of temperature compensation. The UCC T5 uses an external power supply and manges full control of the PH20 head, CMM and probe signals and communicates with the CMM's computer.

  [1.4MB]