Installationsanleitungen – KMG Produkte

Dokumente durchsuchen

• Installation guide: ACR2 [en]
  

  Installation guide: ACR2

  No description available

  [1.1MB]
• Installations- und Benutzerhandbücher: ACR3
  

  Installations- und Benutzerhandbücher: ACR3

  No description available

  [1.2MB]
• Installation guide: Autochange system (H-1000-6010) - legacy [en]
  

  Installation guide: Autochange system (H-1000-6010) - legacy

  Renishaw's autochange equipment is the world's first integrated CMM probe exchange system. Mounted within the CMM's working envelope, the autochange system facilitates fast, automatic probe exchange without the need for re-qualification of the probe assembly.

  [608kB]
• Installation guide: IS1-2 [en]
  

  Installation guide: IS1-2

  This guide describes how the IS1-2 (interface selector) functions when used with multiple Renishaw probing systems. It gives information on physical installation, system connections and interface settings, as well as assistance in fault finding during the installation of a system.

  [648kB]
• Installation & user's guide: MCUlite-2, MCU5-2 and MCU W-2 (H-1000-5280) [en]
  

  Installation & user's guide: MCUlite-2, MCU5-2 and MCU W-2 (H-1000-5280)

  The MCUlite-2 is a basic entry level joystick . It has the controls necessary to control a 3-axis touch-trigger CMM and Renishaw head but without the sophistication of an LCD display screen. The MCU5-2 has been developed for use with Renishaw's REVO and PH20 systems, providing the ability to move the CMM in the probe and stylus axis and has an LCD display. The wireless manual control unit (MCU W-2) is a CMM joystick designed for use with Renishaw's range of UCC controllers. Based on the MCU5‐2 joystick design, the MCU W‐2 uses modern battery technology and Bluetooth® radio modules to provide an effective wireless joystick with a maximum range of 25 m and over eight hours between battery changes.

  [1.1MB]
• Installations- und Benutzerhandbücher: MRS modulares Befestigungssystem
  

  Installations- und Benutzerhandbücher: MRS modulares Befestigungssystem

  MRS modulares Befestigungssystem

  [871kB]
• Installation guide: MRS2 (H-1000-5255) [en]
  

  Installation guide: MRS2 (H-1000-5255)

  This guide provides detailed installation instructions for the Renishaw modular rack system (MRS2).

  [4.6MB]
• Installation & user's guide: NDI AUTOsense touch-trigger module (H-1000-5180) [en]
  

  Installation & user's guide: NDI AUTOsense touch-trigger module (H-1000-5180)

  The AUTOsense module is a dual function stylus holder that enables touch trigger probing for both single-point and scanning. The AUTOsense module is only compatible with supported NDI hand-held probes.

  [1.3MB]
• Installation & user's guide: PH10 PLUS (H-1000-7592) [en]
  

  Installation & user's guide: PH10 PLUS (H-1000-7592)

  Each of the heads in the PH10 PLUS motorised probe head range is a general purpose, versatile unit designed specifically for use on direct computer controlled (DCC) coordinate measuring machines (CMMs).

  [960kB]
• Installation & user's guide: PH10M-iQ PLUS (H-1000-7564) [en]
  

  Installation & user's guide: PH10M-iQ PLUS (H-1000-7564)

  PH10M-iQ PLUS is a derivitive of the PH10 PLUS range of heads. PH10M-iQ PLUS has inferred qualification meaning that after initial calibration is performed, all other positions of the head are inferred which eliminates the need to recalibrate each required head position.

  [872kB]
• Installations- und Benutzerhandbücher: PH20
  

  Installations- und Benutzerhandbücher: PH20

  No description available

  [1.5MB]
• Installation guide: PHC10-3 PLUS [en]
  

  Installation guide: PHC10-3 PLUS

  This guide gives information on physical installation, system connections, communications and interface settings, as well as assistance in fault-finding during the installation of PHC10-3 PLUS.

  [918kB]
• Installation & user's guide: PHS-2 (H-1000-5620) [en]
  

  Installation & user's guide: PHS-2 (H-1000-5620)

  PHS-2 is designed to meet the arduous requirements of 'body-in-white' measurement, where fine angular position and long reach are needed.

  [3.2MB]
• Installation guide: PI 200-3 [en]
  

  Installation guide: PI 200-3

  No description available

  [1.3MB]
• Installation guide: PI 7-3 [en]
  

  Installation guide: PI 7-3

  The PI 7-3 is a dedicated signal conditioner for interfacing the TP7M series of probes or touch-trigger probe types such as TP2, TP20 or TP6 / TP6A, to the CMM controller.

  [865kB]
• Benutzerhandbuch: Nachrüst-Steuerungsschrank
  

  Benutzerhandbuch: Nachrüst-Steuerungsschrank

  Der Steuerungsschrank von Renishaw ist eine Standard 19”-Rack-Einheit, in der verschiedene Renishaw Steuerungen, Servoverstärker und Interfaces untergebracht werden können. Dieser Schrank bietet sowohl ein Lagersystem als auch ein einzigartiges Verbindungssystem hin zum KMG, wodurch eine saubere und ordentliche Installation möglich wird. Neben der Unterbringungsmöglichkeit für alle Renishaw-Geräte besitzt der Schrank ein integriertes Netzsystem mit Ein/Aus-Schalter.

  [528kB]
• Installation & user's guide: RSP3 (H-1000-5124) [en]
  

  Installation & user's guide: RSP3 (H-1000-5124)

  The RSP3 range of probes gives REVO users the ability to carry cranked stylus arrangements and enhanced capability for carrying long styli.

  [1.5MB]
• Installations- und Benutzerhandbücher: SFP2
  

  Installations- und Benutzerhandbücher: SFP2

  Das SFP2 Messsystem ermöglicht die Integration automatischer Rauheitsmessungen (Oberflächenrauheit) auf KMGs, die mit dem REVO Multisensor 5-Achsen-Messsystem bestückt sind.

  [1.4MB]
• Installation guide: SP25M [en]
  

  Installation guide: SP25M

  This document is intended as a guide to initial installation and integration of the Renishaw SP25M analogue scanning/measurement probe system.

  [1.2MB]
• Installation & user's guide: SP600, SCR600 and AC1, AC2 (H-1000-5175) [en]
  

  Installation & user's guide: SP600, SCR600 and AC1, AC2 (H-1000-5175)

  SP600M is an auto-jointed, multiwired analogue scanning probe suitable for mounting on certain motorised and fixed Renishaw probe heads. SP600Q is a quill mounted version of the SP600M analogue scanning probe. SP600 is a shank mounted version of the SP600M analogue scanning probe.

  [887kB]
• Installation guide: SP80 and SP80H [en]
  

  Installation guide: SP80 and SP80H

  This installation and integration guide is intended to assist OEM and Renishaw personnel in the initial installation, integration and use of the Renishaw SP80 and SP80H ultra-high accuracy scanning probes. The SP80 and SP80H are quadrature output measurement probes that provide class-leading performance, as well as the most flexible use of styli for maximum productivity.

  [1.2MB]
• Installation guide: SPA2-2 (H-1000-5247) [en]
  

  Installation guide: SPA2-2 (H-1000-5247)

  SPA2-2 servo power amplifier installation guide

  [1.4MB]
• Installationshandbuch: UCC S5 REVO-2 KMG Steuerung Installationshandbuch (H-1000-5465)
  

  Installationshandbuch: UCC S5 REVO-2 KMG Steuerung Installationshandbuch (H-1000-5465)

  No description available

  [1.6MB]
• Installation guide: UCC T3 PLUS and UCC S3 CMM controller (H-1000-2118) [en]
  

  Installation guide: UCC T3 PLUS and UCC S3 CMM controller (H-1000-2118)

  No description available

  [1.5MB]
• Installation guide: UCC T3-2 (H-1000-5254) [en]
  

  Installation guide: UCC T3-2 (H-1000-5254)

  No description available

  [1.2MB]
• Installationshandbuch: UCC T5
  

  Installationshandbuch: UCC T5

  No description available

  [1.5MB]