Navigation
AM1 / AM2 adjustment modules
The AM1 adjustment module has been designed for use with the PH6M and MIH manual probe heads and the PH10T PLUS / PH10M PLUS motorised probe heads.
The AM2 adjustment module has been designed for use with the PH10MQ PLUS motorised probe head.
AM1 module
It provides quick and accurate angular alignment of the probe heads with the CMM's axes and/or the autochange rack.
In addition, the quick release mechanism allows the head to be removed for storage and subsequently replaced without further alignment. Built in the overtravel protection decreases the risk of head damage.
AM2 module
The probe head is mounted directly onto the quill via the AM2.
M = Multiwire
Q = Quill mounted
AM1 | AM2 | |
|---|---|---|
Size | 60 mm × 15.5 mm (2.36 in × 0.61 in) nominal | 80 mm × 10 mm (3.15 in × 0.39 in) nominal |
Adjustment | ±2° in pitch and roll* (recommended) ±4.5° in yaw | ±1° in pitch and roll* (recommended) ±1° in yaw |
Overtravel | ±3.5° in pitch and roll | 0° |
Mounting | Mounts to quill using shanks Alternatively direct to quill using OEM adaptor | Mounts direct to quill |
Weight | 150 g (5.29 oz) | 48 g (1.69 oz) |
* Up to ±5.5° in pitch and roll is possible but this is at the expense of overtravel.
