Navigation
SCP600 pick up / put down routines
NOTE:
The following section assumes that the datum created in '
Datuming the SCP600' is the axis system that the machine is working in.
Put down routine
The following table lists the recommended procedure for putting down a stylus module on the SCP600. All dimensions are absolute and given in mm.
| Operation | X-axis | Y-axis | Z-axis |
| Inhibit the probe and move to stand-off position | 0 | 50 | 8 |
| Move into port | 0 | 0 | 8 |
| Detach stylus | 0 | 0 | 0 |
| Move to stand-off position | 0 | 50 | 0 |
Pick up routine
The following table lists the recommended procedure for picking up a stylus module from the SCP600. All dimensions are absolute and given in mm.
| Operation | X-axis | Y-axis | Z-axis |
| Move to stand-off position | 0 | 50 | 8 |
| Move into port | 0 | 0 | 8 |
Attach stylus | 0 | 0 | 0 |
Move to stand-off position and activate the probe | 0 | 50 | 0 |