Navigation
Kiosk workstation maintenance
Lifting
NOTE: Lifting must only be carried out by the kiosk workstation installer. Please contact the kiosk workstation installer.
Periodic checks
It is advised to periodically check the kiosk and cable management system for damage or wear to key parts. Any visible damage or wear should be reported to the system maintenance engineer.
User serviceable parts
The kiosk has four fans which are the only user serviceable components.
Cooling fans
CAUTION: Ensure the cabinet is switched OFF before changing the filter.
The four kiosk fans are used to push air out of the cabinet for cooling the equipment within. Two fans are located on the top rear panel of the kiosk and one is located on each lower side panel.
The fans have mesh filters. Renishaw recommends that these are changed every 12 months at a minimum. If the kiosk is located in an environment with high levels of particulates in the air, the filters should be changed at more regular intervals.
Description | Part number |
|---|---|
Mesh filter replacement kit (pack of five) | A-6509-0400 |
Cleaning
Clean the kiosk workstation with a dry, lint-free cloth.