Ez az oldal az Ön nyelvén jelenleg nem elérhető. Az automatikus fordítás a megtekinthető a Google Fordító segítségével. A szolgáltatás biztosításáért nem vállalunk felelősséget, a fordított szöveget nem ellenőrizzük.
Ha további segítségre van szüksége, lépjen kapcsolatba velünk.

Legacy products

5-axis technology

User guide: REVO

User guide: REVO

REVO is a dynamic measuring head and probe system from Renishaw. It is a revolutionary product designed to maximise measurement throughput whilst maintaining high system accuracy.
[2.8MB]
Installation & user's guide: SFP1

Installation & user's guide: SFP1

No description available
[1.6MB]
User guide: RFP1 (H-1000-5430)

User guide: RFP1 (H-1000-5430)

The REVO fringe probe (RFP1) is a non-contact structured light sensor for the REVO® system offering highly accurate measurement of surface topology on an infinite positioning, 5-axis CMM platform.
[894kB]
Data sheet: SFM-C2

Data sheet: SFM-C2

Enhanced access and inspection capability for integrated surface finish measurement
[150kB]

3-axis technology

Installation guide: PH10 (H-1000-5071) - legacy

Installation guide: PH10 (H-1000-5071) - legacy

PH10 motorised probe heads and controllers installation guide
[2.6MB]
Installation guide: PHS1 (H-1000-4044) - legacy

Installation guide: PHS1 (H-1000-4044) - legacy

The Renishaw servo positioning head (PHS1) is a 2-axis motorised head with continuous 360° servo drive enabling the probe configuration to be positioned at almost any angle. This makes the head ideal for use in restricted spaces and enables styli to be angled normal to a surface or aligned to the axis of a hole.
[1.6MB]
User guide: PHS1

User guide: PHS1

The Renishaw servo positioning head (PHS1) is a 2-axis motorised head with continuous 360° servo drive enabling the probe confi guration to be positioned at almost any angle. This makes the head ideal for use in restricted spaces and enables styli to be angled normal to a surface or aligned to the axis of a hole.
[1.4MB]

Touch-trigger probes

User guide: Touch-trigger probe systems - TP1, TP2, TP6, TP6A, PH1, PH5, PH6, PH6M

User guide: Touch-trigger probe systems - TP1, TP2, TP6, TP6A, PH1, PH5, PH6, PH6M

No description available
[541kB]

Probe interfaces

Installation guide: PI 200 (H-1000-5029) - legacy

Installation guide: PI 200 (H-1000-5029) - legacy

The TP200 probe system comprises the TP200 probe sensor and stylus module, the PI 200 interface and the optional SCR200 stylus change rack.
[1.8MB]
Installation guide: PI 4-2 (H-1000-5004) - legacy

Installation guide: PI 4-2 (H-1000-5004) - legacy

The PI 4-2 is a basic probe interface for use with Renishaw’s conventional touch‑trigger probes (TP1, TP20, TP6, MH20i etc.). It is suitable for use on both manual and direct computer control (DCC) co-ordinate measuring machines (CMMs).
[930kB]
Installation guide: PI 7-2 (H-1000-5015) - legacy

Installation guide: PI 7-2 (H-1000-5015) - legacy

Installation guide for the PI 7-2 interface for Renishaw's TP7M probe
[604kB]

Machine controllers and amplifiers

Installation guide: UCC1 (H-1000-5056) - legacy

Installation guide: UCC1 (H-1000-5056) - legacy

The Renishaw UCC1 controller is designed to link a CMM host computer to the hardware of a CMM. The controller can provide services to the component parts of a CMM system.
[910kB]
Installation guide: UCClite-2 and UCClite (H-1000-5109) - legacy

Installation guide: UCClite-2 and UCClite (H-1000-5109) - legacy

The UCClite-2 is an addition to the Renishaw CMM controller product range. Utilising the UCC1 platform introduced in 1997, the UCClite-2 offers similar system performance and capability.
[2.7MB]
Installation guide: UCC2

Installation guide: UCC2

The UCC2 is a further development in Renishaw’s CMM controller product range. Building on the UCC1 platform introduced over five years ago, the UCC2 offers additional capability and system performance.
[1.5MB]
Installation guide: UCC T3 (H-1000-7578) - legacy

Installation guide: UCC T3 (H-1000-7578) - legacy

UCC T3 is an addition to the Renishaw CMM controller product range. UCC T3 combines the control capabilities of UCClite-2 with the servo power amplifier performance of the SPAlite, with enhancements for higher power and category 2 E-STOP.
[2.1MB]
User guide: HCU1 motorised probe head - hand control unit

User guide: HCU1 motorised probe head - hand control unit

HCU1 is a hand control unit for use with the Renishaw range of PH10 motorised head systems.
[242kB]
Installation guide: SPAlite (H-1000-5107) - legacy

Installation guide: SPAlite (H-1000-5107) - legacy

The SPAlite is a servo power amplifier designed specifically for use with the Renishaw UCC2 and UCClite controllers. The SPAlite is capable of controlling three axes of movement with configurable velocity feedback options to match the requirements of your installation.
[354kB]
Installation guide: SPA1 (H-1000-5068) - legacy

Installation guide: SPA1 (H-1000-5068) - legacy

SPA1 servo power amplifier installation guide
[1.0MB]
Installation guide: SPA1 servo tuning (H-1000-5227) - legacy

Installation guide: SPA1 servo tuning (H-1000-5227) - legacy

The object of this UCC servo tuning user’s guide is to provide a user-friendly publication to assist in the task of setting up the servo response of the CMM. When used in conjunction with our “RENICIS” installation / fault finding software, this document should enable a competent technician to set up a CMM either at the assembly plant or on-site.
[856kB]
Installation guide: SPA2 (H-1000-5234) - legacy

Installation guide: SPA2 (H-1000-5234) - legacy

The SPA2 is a digital servo power amplifier solution designed specifically for use with the Renishaw UCC2 or UCClite controller. The SPA2 is capable of controlling up to seven axes of movement but is customer configurable to the requirements of the installation.
[1013kB]
Installation guide: SPA3 (H-1000-7566) - legacy

Installation guide: SPA3 (H-1000-7566) - legacy

SPA3 is a servo power amplifier with enhancements for higher power and category 2 E-STOP. The high power capability combined with a compact form enables use of the SPA3 across a wide range of machines.
[1.6MB]
Installation guide: PHC10-3

Installation guide: PHC10-3

No description available
[882kB]

Racks and ports

Data sheet: MSR1

Data sheet: MSR1

The MSR1 manual storage rack provides convenient storage for up to 6 probe or stylus assemblies, from the Renishaw TP20 or TP200 probe range.
[252kB]
Data sheet: MAPS manual autojoint probe stand

Data sheet: MAPS manual autojoint probe stand

The Renishaw manual autojoint probe stand (MAPS) is a compact storage rack for up to six autojointed probe combinations.
[1.0MB]

For information regarding current products please refer to the 'Installation and user's guide downloads' page.