Navigation
UCC BI installation
Dimensions
NOTE: Dimensions in mm (in).
Weight: 2.1 kg (4 lb 10 oz)
UCC BI can either be free standing or used in a 19 inch rack system.
WARNING: Ensure the UCC BI is disconnected from the mains supply during installation.
Free-standing installation
The UCC BI unit draws air from the right hand side when viewed from the front and expels air out of the left hand side. A minimum clearance gap of 10 mm is necessary between the sides of the unit and any obstruction. The dimensions shown on the above drawing are in mm (in).
Mounting in a 19 inch rack (optional)
NOTE: The screws supplied with this kit are M5 × 6 mm countersink type.
The rack mounting kit (Renishaw part number A-5518-0005) contains two brackets and four M5 × 6 mm screws. Assemble the brackets to the UCC BI as shown below: