Navigation
PHC10-3 PLUS probe head controllers
PH10M-iQ PLUS must be used in conjunction with PHC10-3 PLUS, UCC S3 or UCC T3 PLUS.
PHC10-3 PLUS manages all head functions and communicates via a serial interface with the CMM computer. If an internal probe interface is fitted with the PHC10-3 PLUS it will obtain its power internally from the PHC10-3 PLUS controller.
PHC10-3 PLUS is available in three options:
Standard PHC10-3 PLUS with provision for interface card to be inserted
(Renishaw part number A-5863-0100)
PHC10-3 PLUS with single rear panel and integrated PI 200-3 probe interface
(Renishaw part number A-5863-0200)
PHC10-3 PLUS with integrated PI 200-3 probe interface and external PICS loop
(Renishaw part number A-5863-0300)
Refer to the PHC10-3 PLUS installation guide (Renishaw part number H-1000-0077) for further detail.
Powering PHC10-3 PLUS
The PHC10-3 PLUS head controller is to be used with the provided PSU. This is a 24 Vdc 40 W supply and is connected to the PHC10-3 PLUS via Ø5.5 mm dc jack plug.
NOTE: PHC10-3 PLUS does not does require a protective earth, however an equipotential bonding point is provided on the rear panel for connection to the rest of the installation.
NOTE: For system interconnection diagrams refer to the PHC10-3 PLUS installation guide (Renishaw part number H-1000-7592).