TP7M / TP7M EP touch-trigger probes

Electronic strain gauge based probe for excellent repeatability and high precision 3D form measurement

Compatible with PH10M PLUS / PH10MQ PLUS or PH6M heads via the autojoint connector for fast and repeatable probe changing when used with a Renishaw autochange rack system
6-way measuring capability (±X, ±Y, ±Z)
Stylus reach up to 180 mm (7.09 in) using GF range
Zero reseat errors and no lobing effect
TP7M EP is an enhanced performance probe, capable of achieving a 3D accuracy of < 0.6 μm tested to ISO 10360 Pt 2
TP7M and TP7M EP requires the PI 7-3 interface which has two switchable levels of sensitivity to accommodate differing applications

NOTE: Dimensions in mm (in).

Principal application	FMS and automated systems Universal DCC CMMs TP7M EP is particularly useful when high accuracy measurement is required
Sense directions	6-axis: ±X, ±Y, ±Z
3D accuracy (test to ISO 10360 Pt 2) †	TP7M N/A TP7M EP <0.6 μm (<0.000024 in)
Unidirectional repeatability (2σ μm) Trigger level 1 Trigger level 2	0.25 μm (0.00001 in) 0.25 μm (0.00001 in)
XY (2D) Form measurement deviation Trigger level 1 Trigger level 2	±0.25 μm (0.00001 in) ±0.50 μm (0.00002 in)
XYZ (3D) Form measurement deviation Trigger level 1 Trigger level 2	±0.50 μm (0.00002 in) ±1 μm (0.00004 in)
Trigger force (at stylus tip) XY plane Z-axis	0.02 N 0.15 N
Overtravel force XY plane Z-axis	0.78 N 11.75 N
Weight	85 g (3 oz)
Maximum extension (if on a PH10 PLUS series head)	200 mm (7.87 in)
Maximum recommended stylus length (M4 styli range)	150 mm (5.91 in) stainless steel 180 mm (7.09 in) GF (carbon fibre)
Mounting method	Multiwired autojoint
Suitable interface	PI 7-3
Automatic probe change	Autochange rack

	Part number
TP7M probe kits
TP7M probe kit	A-1073-0121
TP7M probe and stylus kit	A-1073-0123
TP7M EP probe kits
TP7M EP probe kit	A-1073-0261
TP7M EP probe and stylus kit	A-1073-0263
PI 7-3 probe interface
PI 7-3 probe interface for TP7M	A-5726-0100
PI 7-3 interface card for use with PHC10-3 PLUS	A-5726-0200

CMM support