Skip navigation

TP200 touch-trigger probe system

Electronic module-changing probes, using strain-gauge technology, for manual and DCC CMMs

TP200 probe body with standard force module

The TP200 / TP200B are electronic probes using strain gauge technology, which gives higher accuracy than kinematic touch-trigger probes. They combine outstanding metrology performance with superior functionality to produce a highly versatile DCC CMM probing system, with excellent productivity.

Features and benefits

  • Excellent repeatability and precision 3D form measurement
  • Rapid exchange between stylus configurations without the need to re-calibrate
  • 6-way measuring capability (±X, ±Y, ±Z)
  • Zero reseat errors and no lobing effect
  • Suitable for intensive 'peck' or 'stitch' scanning
  • Stylus reach up to 100 mm (3.99 in) GF range
  • Module life of more than 10 million triggers
  • Compatible with the full range of Renishaw probe heads and accessories

Dimensions

TP200 - dimensions

NOTE: Dimensions in mm (in).

Specification


TP200

TP200B

Principal application

DCC CMM where high accuracy is required

As TP200 but where 'air trigger'* events occur

Sense directions

6-axis: ±X, ±Y, ±Z

As TP200

Unidirectional repeatability (2σ µm)

Trigger level 1

0.4 µm (0.000016 in)

As TP200

Trigger level 2

0.5 µm (0.00002 in)

As TP200

XY (2D) form measurement deviation

Trigger level 1

±0.8 µm (0.000032 in)

±1 µm (0.00004 in)

Trigger level 2

±0.9 µm (0.000036 in)

±1.2 µm (0.000047 in)

XYZ (3D) form measurement deviation

Trigger level 1

±1 µm (0.00004 in)

±2.5 µm (0.0001 in)

Trigger level 2

±1.40 µm (0.000056 in)

±4 µm (0.00016 in)

Repeatability of stylus change

With SCR200

±0.50 µm (0.00002 in) max

As TP200

Manual

±1 µm (0.00004 in) max

As TP200

Trigger force (at stylus tip)

XY plane - all modules

0.02 N

As TP200

Z-axis - all modules

0.07 N

As TP200

Overtravel force (@ 0.5 mm displacement)

XY plane - SF / EO module

0.2 N to 0.4 N

As TP200

XY plane -LF module

0.1 N to 0.15 N

As TP200

Z-axis - SF / EO module

4.90 N

As TP200

Z-axis -LF module

1.60 N

As TP200

Weight (probe sensor and module)

22 g (0.78 oz)

As TP200

Maximum extension (if on PH10 series head)

300 mm (11.81 in)

As TP200

Maximum recommended stylus length (M2 styli range)

SF / EO module

50 mm (1.97 in) steel to 100 mm (3.94 in) GF

As TP200

LF module

20 mm (0.79 in) steel to 50 mm (1.97 in) GF

As TP200

Mounting method

M8 thread

As TP200

Suitable interface

PI 200-3, UCC

As TP200

Stylus module changing rack

SCR200

SCR200

Stylus range

M2

As TP200


Above data applies for test conditions as follows: Stylus length 50 mm (1.97 in), stylus velocity 480 mm/min (1.57 ft/min).

* Air trigger (or false trigger). The TP200B reduces probe triggers that may be caused by vibrations.


Part number
TP200 probe
TP200 body / sensor only
A-1207-0020
TP200 probe kits
TP200 kit 1 (including standard force stylus module)
A-1207-0001
TP200 kit 2 (including low force stylus module)
A-1207-0002
TP200B probe kits
TP200B kit 1 (including standard force stylus module)
A-1207-0055
TP200 stylus modules
TP200 standard force stylus module
A-1207-0010
TP200 low force stylus module
A-1207-0011
TP200 EO (extended overtravel) stylus module
A-1207-0012
TP200 probe interface
PI 200-3 probe interface for TP1, TP2, TP6, TP20 and TP200
A-5707-0100
PI 200-3 interface card for use with PHC10-3 PLUS
A-5707-0200
SCR200 stylus changing rack
SCR200 rack for automatic stylus changing with TP200 (rack only)
A-1207-0031
SCR200 - active 6 port change rack for use with TP200 (includes 3 × standard force stylus modules)
A-1207-0030
SCR200 - active 6 port change rack for use with TP200 (includes 3 × low force stylus modules)
A-1207-0070
TP200 accessories
24 V PSU for PHC10-3 PLUS, PI 200-3 and PI 7-3

P-PW01-0067

M12 location pieceM-1371-0298